Mobilny kompleks czyszczący do nasion w Polsce.

Zasada działania samobieżnego kompleksu czyszczącego

Dane techniczne

Wstępne czyszczenie i sortowanie - 30 t/h

Precyzyjne czyszczenie i sortowanie - 15 t/h

Zapotrzebowanie mocy elektrycznej - 15 kW/h,380 V

Wymiary w położeniu roboczym: Długość / Szerokość /Wysokość 3500 mm/6500 mm/5300 mm

Wymiary transportowe: Długość/ Szerokość/ Wysokość 3500 mm/ 6300 mm/ 2600 mm

Waga - 1800 kg

1. Grain; 2. Intake hopper; 3. Loading chain conveyor; 4. Car wheels; 5. Cyclone-Sedimentary Chamber; 6. Control panel; 7. Discharge conveyor; 8. Motor with impeller; 9. Air duct; 10. Trays for separarted fractions; 11. Waste bin; 12. Separation chamber; 13. Second sedimentary chamber; 14. Overflow.
Operating principle of «MGC-25»The grain 1 or seeds are fed with the loading conveyor 3 into the intake hopper 2 where 3 sensors are set, 2 of the sensors are connected to the wheels 4. In semi-automatic mode, depending on the hopper 2 filling with the grain, the sensors can turn on or turn off the MGC-25 movement. Then the grain 1 is uniformly supplied into the chamber of separation 12 for the grain sorting out / calibrating by grades. The laminar flow is generated by motor and impeller 8, then the air flow is directed out of separation chamber and takes away the light impurities. The cleaned and graded grains are directed to the trays. The Operator selects the proper tray and, using the control levers, directs the grain into the discharge conveyor 7. The air, which circulates within the MGC-25, is purified within the cyclone-sedimentary chamber (CSC) 5 and is fed to the impeller through the sidelong air duct 9. There is a second sedimentary chamber 13 for light impurities, which are dropped down into the special wheeled hopper. The lightest impurities and dust is precipitated and accumulated to the special tray. The MGC-25 operation control is made using control panel 6.